Before you try anything: always speak to a professional before cleaning, treating or applying any product to your stone. Every slab is different, and the wrong product can cause permanent damage. Contact us or a qualified stone restorer first.
Quick answer
Rust stains in marble need a rust-removing poultice made specifically for marble and natural stone, applied thickly, covered and left to dry. Never use an ordinary acidic rust remover on marble: it will lift the rust and etch the surface at the same time.
First, check what you are dealing with
- Orange or brown ring the shape of a can or tin: rust transfer.
- Orange spots with no obvious source: possibly iron within the stone. Ask a restorer.
What you need
- Stone-safe rust poultice
- Plastic wrap and tape
- Plastic scraper
- Gloves
Step by step
Remove the source
Take away the can, tin or metal object and wipe the area with warm soapy water.
Apply a stone-safe rust poultice
Use a rust remover labelled safe for marble, following its instructions. Most are applied thickly and left to dry.
Cover and wait
Cover with plastic, tape the edges and leave for the time on the label, usually 24 hours.
Remove and assess
Scrape off with a plastic scraper, rinse and dry. Repeat once if needed.
What not to use on marble
- Vinegar, lemon juice or "natural" citrus cleaners: they etch marble.
- Scourers, steel wool and abrasive creams on a polished surface.
- Mixing cleaning chemicals, especially bleach with anything else.
- Household rust removers and oxalic or hydrochloric acid products.
When to call a professional
Deep rust, or rust that seems to come from within the stone, needs a restorer. A stone restorer can hone and re-polish marble back to an even finish, and on bookmatched or heavily veined slabs that is the safest route.
Understanding rust stains on marble
Marble is moderately porous. A polished, sealed slab slows liquids down, but anything left for a few minutes can still work its way into the surface, and white marbles show every mark.
A stone restorer can hone and re-polish marble back to an even finish, and on bookmatched or heavily veined slabs that is the safest route.
Good to know
Rust on marble usually comes from cans, bobby pins, metal pot plant bases or iron in the water. Never use an acidic rust remover on marble; it removes the rust and etches the stone.
Stop it happening again
Whether yours is Calacatta, Carrara, Statuario, Nero Marquina, Emperador and Crema Marfil, repairing it fixes today's mark; protecting it stops the next one. Our clear Stone Protection Film sits over the surface, so acids cannot etch it and liquids cannot soak in. Choose Gloss for polished marble or Matte/Satin for honed and matte finishes. The protection is identical. It is installed across Sydney with a 10-year written warranty.
How we protect marble · Stain removal guide · Rust stains on every surface