Terrazzo · Chips & cracks

How to repair chips in terrazzo

  • Time1 to 2 hours plus curing
  • DifficultyModerate (small chips) to professional
  • SurfaceHoned or polished terrazzo

By the Stone Film Sydney team · Updated

Before you try anything: always speak to a professional before cleaning, treating or applying any product to your stone. Every slab is different, and the wrong product can cause permanent damage. Contact us or a qualified stone restorer first.

Quick answer

Small chips in terrazzo are filled with a colour-matched cementitious or epoxy repair compound, left to cure, then shaved flush and polished. For visible edges and anything larger than a fingernail, a professional repair is much harder to spot. Cracks should always be assessed first.

First, check what you are dealing with

  • Small piece missing from an edge or corner: chip.
  • Line running across the surface: crack. Have it assessed.
  • Hollow sound or movement: possible structural issue.

What you need

  • Colour-matched filler or repair kit
  • Masking tape
  • Single-edge razor blade
  • Isopropyl alcohol for cleaning

Step by step

  1. Clean the chip

    Clean with isopropyl alcohol and let it dry completely.

  2. Mask around it

    Tape around the chip to protect the surrounding surface.

  3. Fill slightly proud

    Mix the colour-matched filler and fill the chip slightly higher than the surface.

  4. Cure and shave flush

    Once cured, shave the excess flush with a razor blade held flat.

  5. Finish

    Polish the repair to match, or have a restorer finish it. A terrazzo specialist can re-grind, hone and polish the surface and replace missing chips.

What not to use on terrazzo

  • Superglue on visible areas: it yellows and does not match.
  • Filling a crack without knowing why it cracked.

When to call a professional

Get a professional for sink cut-outs, visible edges, anything larger than a fingernail and any crack. A terrazzo specialist can re-grind, hone and polish the surface and replace missing chips.

Understanding chips and cracks on terrazzo

Terrazzo damage shows as dull patches across chips and binder, stained binder, and occasionally loose chips.

A terrazzo specialist can re-grind, hone and polish the surface and replace missing chips.

Good to know

In terrazzo, a lost chip leaves a small pit that a specialist fills with matching aggregate and binder.

Stop it happening again

Whether yours is cement terrazzo and epoxy (resin) terrazzo, repairing it fixes today's mark; protecting it stops the next one. Our clear Stone Protection Film sits over the surface, so acids cannot etch it and liquids cannot soak in. Choose Gloss for polished terrazzo or Matte/Satin for honed and matte finishes. The protection is identical. It is installed across Sydney with a 10-year written warranty. It will not stop a heavy knock from chipping an edge, but it protects everything else.

How we protect terrazzo · Choosing benchtops · Chips & cracks on every surface

Frequently asked questions

Small chips repaired by a professional are usually very hard to spot.
Yes. A clean break can sometimes be glued back with epoxy.
Film protects the surface from scratches, stains and etching, but it will not stop a heavy impact from chipping an edge.
Most hairline cracks are cosmetic, but have any crack that grows or moves assessed by a stonemason.

Protect your terrazzo before the next spill.

Request a free quote online or by email. We will call to arrange an on-site visit or a quote over the phone.