Granite · Chips & cracks

How to repair chips in granite

  • Time1 to 2 hours plus curing
  • DifficultyModerate (small chips) to professional
  • SurfacePolished, honed or leathered granite

By the Stone Film Sydney team · Updated

Before you try anything: always speak to a professional before cleaning, treating or applying any product to your stone. Every slab is different, and the wrong product can cause permanent damage. Contact us or a qualified stone restorer first.

Quick answer

Small chips in granite are filled with a colour-matched epoxy or knife-grade stone filler, left to cure, then shaved flush and polished. For visible edges and anything larger than a fingernail, a professional repair is much harder to spot. Cracks should always be assessed first.

First, check what you are dealing with

  • Small piece missing from an edge or corner: chip.
  • Line running across the surface: crack. Have it assessed.
  • Hollow sound or movement: possible structural issue.

What you need

  • Colour-matched filler or repair kit
  • Masking tape
  • Single-edge razor blade
  • Isopropyl alcohol for cleaning

Step by step

  1. Clean the chip

    Clean with isopropyl alcohol and let it dry completely.

  2. Mask around it

    Tape around the chip to protect the surrounding surface.

  3. Fill slightly proud

    Mix the colour-matched filler and fill the chip slightly higher than the surface.

  4. Cure and shave flush

    Once cured, shave the excess flush with a razor blade held flat.

  5. Finish

    Polish the repair to match, or have a restorer finish it. A stone restorer can re-polish granite with diamond pads and draw out deep stains.

What not to use on granite

  • Superglue on visible areas: it yellows and does not match.
  • Filling a crack without knowing why it cracked.

When to call a professional

Get a professional for sink cut-outs, visible edges, anything larger than a fingernail and any crack. A stone restorer can re-polish granite with diamond pads and draw out deep stains.

Understanding chips and cracks on granite

On polished granite, problems usually show as dull traffic areas, dark oil patches on lighter slabs, or water spots on dark ones.

A stone restorer can re-polish granite with diamond pads and draw out deep stains.

Good to know

Granite chips are usually clean breaks at edges and sink cut-outs. Tinted epoxy can match speckled granite closely.

Stop it happening again

Whether yours is light granites like Kashmir White and dense dark granites like Absolute Black, repairing it fixes today's mark; protecting it stops the next one. Our clear Stone Protection Film sits over the surface, so liquids cannot soak in. Choose Gloss for polished granite or Matte/Satin for honed and matte finishes. The protection is identical. It is installed across Sydney with a 10-year written warranty. It will not stop a heavy knock from chipping an edge, but it protects everything else.

How we protect granite · Choosing benchtops · Chips & cracks on every surface

Frequently asked questions

Small chips repaired by a professional are usually very hard to spot.
Yes. A clean break can sometimes be glued back with epoxy.
Film protects the surface from scratches, stains and etching, but it will not stop a heavy impact from chipping an edge.
Most hairline cracks are cosmetic, but have any crack that grows or moves assessed by a stonemason.

Protect your granite before the next spill.

Request a free quote online or by email. We will call to arrange an on-site visit or a quote over the phone.