Before you try anything: always speak to a professional before cleaning, treating or applying any product to your stone. Every slab is different, and the wrong product can cause permanent damage. Contact us or a qualified stone restorer first.
Quick answer
Turmeric stains in granite come out with a hydrogen peroxide poultice: wipe up the spill, wash the area, then cover the yellow stain with the poultice for 24 to 48 hours. Curcumin, the yellow pigment in turmeric, fades under UV light, so a few days of direct sunlight on the stain often finishes the job.
First, check what you are dealing with
- Yellow or orange mark: turmeric or curry. Follow the steps below.
- Yellow mark with an oily halo: curry oil too. Do a solvent poultice after the peroxide.
What you need
- pH-neutral dish liquid
- Hydrogen peroxide
- Flour, talc or diatomaceous earth
- Plastic wrap and tape
- Plastic scraper
Step by step
Wash the area
Clean with warm water and a few drops of pH-neutral dish liquid, rinse and dry with a soft cloth so you can see what is left on the granite.
Test first
Try the mixture on a hidden spot of your granite (inside a cut-out or under an overhang) and check the finish after it dries.
Mix the poultice
Stir an absorbent powder (plain flour, talc, diatomaceous earth or whiting) into 3% hydrogen peroxide from a pharmacy (test it on a hidden spot first, as peroxide can lighten darker stone) until it has the consistency of peanut butter.
Apply it
Spread it 5 to 6 mm thick over the yellow stain, extending about a centimetre past the edge. Resin-filled fissures in granite will not absorb much; concentrate on the stone around them.
Cover and wait
Cover with plastic wrap, tape the edges and poke a few small holes so it dries slowly. Leave it 24 to 48 hours until completely dry: the drying is what pulls the stain up into the powder.
Remove and rinse
Lift the dry poultice with a plastic scraper, rinse with clean water and dry the granite. If the yellow stain is lighter but still there, repeat up to three times.
Let the sun help
Curcumin, the yellow pigment in turmeric, fades under UV light, so a few days of direct sunlight on the stain often finishes the job.
Dark stone: On dark granite, use 3% hydrogen peroxide only and test it first, as stronger peroxide can lighten some stones.
What not to use on granite
- Scourers, steel wool and abrasive creams on a polished surface.
- Mixing cleaning chemicals, especially bleach with anything else.
- Bleach, which can leave a pale patch in the stone.
When to call a professional
If a yellow shadow persists after poulticing and sunlight, a restorer can treat it. A stone restorer can re-polish granite with diamond pads and draw out deep stains.
Understanding turmeric and curry stains on granite
Granite porosity varies enormously: dense dark granites barely absorb anything, while light, coarse-grained granites soak up oil around the cooktop.
A stone restorer can re-polish granite with diamond pads and draw out deep stains.
Good to know
On light granite, turmeric stains the feldspar grains and can look speckled. It responds to peroxide like other organic stains.
Stop it happening again
Whether yours is light granites like Kashmir White and dense dark granites like Absolute Black, repairing it fixes today's mark; protecting it stops the next one. Our clear Stone Protection Film sits over the surface, so liquids cannot soak in. Choose Gloss for polished granite or Matte/Satin for honed and matte finishes. The protection is identical. It is installed across Sydney with a 10-year written warranty.
How we protect granite · Stain removal guide · Turmeric & curry stains on every surface